Ordering Options Price: $12.95 Quantity* Quantity* Questions about quantity? Click here.

Product Description

Diaper Covers Deluxe is a three-in-one cloth diaper cover pattern. With it, you can make three different styles of cloth diaper covers; Quick Wrap front closing diaper cover, Quick Snap side snapping diaper cover, and Pull-Ons a pull on style diaper cover. The yardages below are estimates to help you sew Diaper Covers Deluxe diaper covers from the pattern as directed.

Quick Wrap Sizing:
Preemie: 3-5lbs
Newborn: 5lbs - 10lbs
Small: 10lbs - 15lbs
Medium: 15lbs - 20lbs
Large: 20lbs - 25lbs
X-Large: 25 - 35+lbs

Quick Snap and Pull Ons Sizing:
Newborn: 6lbs - 12lbs
Small: 13lbs - 18lbs
Medium: 18lbs - 22lbs
Large: 22lbs - 32lbs
X-Large: 32 - 38+lbs

Waterproof PUL. Ultrex, waterproof nylon, heavyweight polyester fleece such as Windpro, 200 weight fleece, felted and fulled wool

5/8 yd. for sizes small to X-Large. 1/2 yd. for preemie and newborn.

Thread
Quick Wrap: 5/8 yard of 1/4" wide braided elastic, 1/3 yard of 1 1/2" wide to 2" wide Hook & Loop Tape, 2 1/4 yards of 1 3/4" wide or 2" wide non-wicking binding*.
Quick Snap: 4 sets snap studs, 8 sets snap sockets size 16, 2 2/3 yards of 1 3/4" wide or 2" wide non-wicking binding*.
Pull-Ons: 3/8" wide braided elastic - 3/4 yard Newborn, 7/8 yard Small, 1 yard Medium and Large, 1 1/8 yard X-Large.

1/2 yard or a scrap 18" x 18" for sizes Preemie thru Small.
5/8 yard or a scrap 24" x 22" for sizes Medium thru X-Large.

The binding of a diaper covers should not wick moisture from the wet diaper to the outside. When choosing binding fabric always consider wicking as an important factor. Some examples of recommended binding are as follows: staliblized nylon tricot, nylon tricot (not stabilized), binding strips cut from diaper cover fabric, foldover elastic, Lycra/Spandex ready-made binding.

Moderate skill is required to apply the binding.

Use a regular sewing machine for all cover styles.  A zigzag stitch is recommended in some steps, but is not required.

There is a sewing machine foot available at Nancy’s Notions, Ltd. called the Bias Binder Foot. The pattern designer highly recommends it. (You do not need it if you're binding the covers with foldover elastic binding). Also, if you have a machine that takes snap-on feet, like an Elna, this foot does still work with a small modification. Simply push out the metal pin that hold the shank to the foot, I used a straight pin to push out the metal pin. Then the shank comes right off and you can snap the foot right onto your machine.